Ultem 9085 3D Printing in Fullerton CA

Get Accurate Models With Ultem 9085 3D Printing in Fullerton CA!

With FDM 3D Printing, we can create any assembly regardless of size or complexity. The 3D printing division at ProTek Models, provides quality FDM 3D printing services, including Ultem 9085 3D Printing in Fullerton CA. Ultem9085 resin is a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping. If you are looking for Ultem 9085 3D Printing in Fullerton CA, contact the team at ProTek Models!

Ultem 9085 3D Printing Specs

Choosing the right material for your FDM 3D Printing job is essential. Ultem 9085 resin offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Fullerton CA!

For over 15 years, we have been providing exemplary FDM 3D printing services in Fullerton CA. If you are looking to take advantage of Ultem 9085 3D Printing in Fullerton CA, we can handle the job! Ultem 9085 resin is great for parts requiring high heat, chemical and flame resistance, high dielectric strength, thermal conductivity, and overall strength. Contact the team at ProTek Models today for Ultem 9085 3D Printing in Fullerton CA.

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA Contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730