Ultem 9085 3D Printing in La Canada Flintridge CA

Get Accurate Models With Ultem 9085 3D Printing in La Canada Flintridge CA!

With FDM 3D Printing, there are very few limitations on how far we can take your project. While there are many materials to choose from for your FDM 3D printing project, Ultem 9085 is a great choice for those wanting a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping. When it comes to Ultem 9085 3D Printing in La Canada Flintridge CA, ProTek Models is your one-stop-shop.

Ultem 9085 3D Printing Specs

Ultem 9085 is a great option for FDM 3D printing. Ultem 9085 resin features the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in La Canada Flintridge CA!

With the ProTek Models Difference, you can rest assured that your FDM 3D Printing job will be handled in a timely, reliable, and affordable manner. We do everything in-house and there are few limitations to how far we can take your project. For quality and reliable Ultem 9085 3D Printing in La Canada Flintridge CA, contact ProTek Models today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA Contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730