Ultem 9085 3D Printing in Long Beach CA

Get Accurate Models With Ultem 9085 3D Printing in Long Beach CA!

At ProTek Models, our FDM 3D printing services can handle large and complex assemblies, composite reinforcements, mold making for silicone and composite models, and more! If you’re looking for an FDM 3D printing material that offers high strength-to-weight ratio, high thermal and chemical resistance, and flame, smoke, and toxicity (FST) ratings, you should check out what Ultem 9085 is all about. When it comes to Ultem 9085 3D Printing in Long Beach CA, ProTek Models can do it all!

 

Ultem 9085 3D Printing Specs

At ProTek Models, our Ultem 9085 resin features the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Long Beach CA!

At ProTek Models, we’ve spent over 15 years providing quality FDM 3D printing services to a variety of industries. If you are looking for quality and reliable Ultem 9085 3D Printing in Long Beach CA, contact the experts at ProTek Models today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA Contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730