Ultem 9085 3D Printing in Los Angeles CA

Get Accurate Models With Ultem 9085 3D Printing in Los Angeles CA!

ULTEM 9085 resin is a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping. It is ideal for the transportation industry due to its high strength-to-weight ratio and its FST (flame, smoke, and toxicity) rating. If you are interested in Ultem 9085 3D Printing in Los Angeles CA, contact ProTek Models. For over 15 years we have been providing quality and reliable FDM 3D printing services in Los Angeles CA and beyond.

Ultem 9085 3D Printing Specs

Ultem 9085 resin has a variety of benefits, including the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Los Angeles CA!

With the ProTek Models difference, there are very few limits to how far we can take your FDM 3D printing project. This includes utilizing Ultem 9085 as an FDM 3D printing material. There are many benefits to using Ultem 9085 for your project and if you are interested in learning more about Ultem 9085 3D Printing in Los Angeles CA, contact ProTek Models today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA Contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730