Ultem 9085 3D Printing in Ontario CA

Get Accurate Models With Ultem 9085 3D Printing in Ontario CA!

If you want a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping, Ultem 9085 is a great choice. At ProTek Models, we offer top-notch Ultem 9085 3D Printing in Ontario CA. No matter what your FDM 3D printing project entails, our skilled team can get the job done!

Ultem 9085 3D Printing Specs

Ultem 9085 resin is a great material for FDM 3D printing. It offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

 

Contact ProTek Models to speak with our team to determine whether or not Ultem 9085 3D Printing in Ontario CA is right for your FDM 3D printing project.

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Ontario CA!

At ProTek Models, we know the importance of delivering quality and reliable FDM 3D printing services. That is why we utilize Ultem 9085 for many of our projects because it is durable and has a high FST rating. If you are interested in learning more about Ultem 9085 3D Printing in Ontario CA or would like to request a quote, contact us today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Ontario CA Contact us today..

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730