Ultem 9085 3D Printing in Orange CA

Get Accurate Models With Ultem 9085 3D Printing in Orange CA!

Ultem 9085 is a flame-retardant high-performance thermoplastic that is a great material for FDM 3D printing. No matter what your FDM 3D printing project entails, the experienced team at ProTek Models can get the job done!  Our reliable Ultem 9085 3D Printing in Orange CA provides great parts and models and features a quick turnaround. Contact us today to request a quote!

Ultem 9085 3D Printing Specs

If you need a flame-retardant high-performance thermoplastic for an FDM 3D printing project, Ultem 9085 is a solid choice that offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

 

Ultem 9085 isn’t right for all projects. Contact ProTek Models today to see if our Ultem 9085 3D Printing in Orange CA is right for your project.

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Orange CA!

For over 15 years, ProTek Models has been offering reliable and affordable Ultem 9085 3D Printing in Orange CA. If you need material for FDM 3D printing that has a high flame, smoke, and toxicity (FST) rating, Ultem 9085 is the go-to choice. Contact ProTek Models today to learn more about our Ultem 9085 3D Printing in Orange CA or to request a quote.

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Orange CA Contact us today..

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730