Ultem 9085 3D Printing in Rancho Cucamonga CA

Get Accurate Models With Ultem 9085 3D Printing in Rancho Cucamonga CA!

At ProTek Models, we provide top of the line FDM 3D printing services in Rancho Cucamonga and beyond. Not only do we offer Ultem 9085 3D Printing in Rancho Cucamonga CA, but we also can handle your process finishing and assembly in house, meaning you get a complete product, on time, at an affordable price. To get started with Ultem 9085 3D Printing in Rancho Cucamonga CA, contact the experts at ProTek Models today!

Ultem 9085 3D Printing Specs

If you think that Ultem 9085 3D Printing in Rancho Cucamonga CA might be right for your project, take a few minutes to read up on the following Ultem 9085 specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

 

Think that Ultem 9085 is the right fit for your project? Contact the team at ProTek Models to discuss your options!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Rancho Cucamonga CA!

At ProTek Models, we know how important it is to choose the right FDM 3D printing materials for your project. If you are interested in Ultem 9085 3D Printing in Rancho Cucamonga CA, contact our team today to discuss your project and get started!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Rancho Cucamonga CA Contact us today.

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730