Ultem 9085 3D Printing in Torrance CA

Get Accurate Models With Ultem 9085 3D Printing in Torrance CA!

ProTek 3D, the 3D printing division at ProTek Models, provides quality FDM 3D printing services. Utilizing our Fortus 900, 450, 400, or 360 machines, our highly skilled team can tackle any assembly regardless of size or complexity. If you are interested in Ultem 9085 3D Printing in Torrance CA, the team at ProTek Models can handle any job no matter how big or small. Contact us today to get started with your FDM 3D printing project!

Ultem 9085 3D Printing Specs

Wondering if Ultem 9085 3D Printing in Torrance CA is right for your project? Ultem 9085 also provides the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

To discover if Ultem 9085 3D Printing in Torrance CA is the right fit for your FDM 3D printing project, contact ProTek Models.

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Torrance CA!

At ProTek Models, we have been providing quality FDM 3D printing services for over 15 years. There is no project too big or too small for our talented team to handle. If you are interested in Ultem 9085 3D Printing in Torrance CA, contact our team today to get your project started!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Torrance CA Contact us today.

 

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730